Description:Product Name: Car Shock AbsorberSize:A size: spring clearance: 47mm, spring thickness: 13mm, spring diameter: 173mmB size: spring clearance: 35mm, spring thickness: 13mm, spring diameter: 160mmD size: spring clearance: 23mm, spring thickness: 10mm, spring diameter: 113mmC size: spring clearance: 27mm, spring thickness: 10mm, spring diameter: 131mmF size: spring clearance: 12mm, spring thickness: 15mm, spring diameter: 120mmE size: spring clearance: 15mm, spring thickness: 9mm, spring diameter: 112mmInstallation method: 1. Use the jack to lift the wheel up (as when replacing the tire), most cars do not have to disassemble the wheel.2: Wipe the shock absorbing spring with clean water (to wipe it many times) to ensure the spring is clean, no gravel, and the gravel will reduce the life of the shock absorber.3: Apply soaked soap to the shock absorbing spring, apply the soaked soap in the groove of the strong buffer; wash your hands and put the strong buffer into the spring (first install the groove, then install it) Slots, you can also install half of the upper and lower slots, then rotate to install the rest until the springs are all in the slots.4: Finally, after installation, hold Shuka with both hands and turn the gap to the middle of the inner side. Use the middle finger of both hands to measure the distance from Shuka to the fender. The middle finger of both hands can be put in for the best, touch it by hand. Make sure the springs are in the slots and you can drop the body.2: Do not use tools when installing: The distance between the shock absorbing springs is a problem to be paid attention to when installing the shock absorbing buffer. What the user has to grasp is that "the distance between the damping springs is equal to the height of the shock absorber."
